Concrete ProsOf Dallas
Concrete Driveways project by Concrete Pros Of Dallas

Concrete Driveways

A driveway is the first thing people see — we build ones that last and lift your curb appeal.

Overview

Concrete Driveways in the Dallas Area

Your driveway takes a beating in North Texas. Between triple-digit summer heat, sudden downpours, and the daily weight of vehicles, a driveway needs to be built right the first time. At Concrete Pros Of Dallas, we pour every residential driveway at a 4-inch minimum thickness — thicker where heavier vehicles are parked — and reinforce with rebar or wire mesh so the slab resists cracking and settling.

Concrete is the most cost-effective driveway material for Dallas homes. It outlasts asphalt, needs far less maintenance than pavers, and stands up to the freeze-thaw and expansion cycles our clay soil creates. Proper grading and control joints are the difference between a driveway that lasts decades and one that fails in a few years — and we get those details right on every pour.

Want more than a plain gray slab? We offer decorative finishes including broom texture for grip, exposed aggregate for a natural stone look, and stamped concrete that mimics brick, slate, or cobblestone at a fraction of the cost.

Why It Matters

Benefits of Our Concrete Driveways

  • Boosts curb appeal and resale value of your home
  • Built to last 25–30+ years with minimal upkeep
  • Low maintenance — no weeds, no re-sanding like pavers
  • Reinforced and properly jointed to resist cracking
  • Custom finishes: broom, exposed aggregate, or stamped
  • Fast installation with minimal disruption to your day
How We Work

Our Process

A real sequence, done in order — every step matters to the finished result.

  1. 1

    Site Prep & Grading

    We remove the old surface, excavate, and grade the base for proper drainage away from your home and foundation.

  2. 2

    Forms & Rebar

    We set forms to your exact layout and install rebar or wire-mesh reinforcement to control cracking over our shifting clay soil.

  3. 3

    Pour & Finish

    We pour quality concrete, screed it flat, and apply your chosen finish — broom, exposed aggregate, or stamped pattern.

  4. 4

    Curing & Sealing

    We cut control joints, cure the slab correctly, and seal it to protect against stains, moisture, and the Texas sun.

Questions

Frequently Asked Questions

How long does a new driveway take to install?

Most residential driveways are demolished, formed, and poured within 2–4 days depending on size and finish. Decorative work like stamping adds a day or two.

How thick should a concrete driveway be?

We pour a 4-inch minimum for standard passenger vehicles and go to 5–6 inches with extra reinforcement where RVs, trucks, or trailers are parked.

Can you do stamped or decorative driveways?

Yes. We offer broom finishes, exposed aggregate, and stamped concrete in a range of patterns and colors that mimic brick, slate, and natural stone.

When can I drive on my new driveway?

Concrete reaches enough strength for foot traffic in 24–48 hours, but we ask you to wait 7 days before parking vehicles so the slab can cure fully.

Ready to Start Your Concrete Project?

Get a free estimate today — no obligation.